If you would love to obtain a bidet mounted in Blakes we can aid. Our professional setup service providers can take care of all your requirements.

Specialist Service
Rapid Feedback Time in Hillsborough County, Florida
Bidet Installation
For Every Types of Bidets, Japanese Toilets, Washlets, Shower Toilets and Smart Toilets
Lots Of Options to Choose From
Residential and Commercial Service

Please call (786) 635-1688 or complete our straightforward contact form and inform us about your bidet setup requirements. We will reply you immediately.

What are the benefits of using a Bidet?

Bidets have been utilized in Europe for decades and have begun to expand in popularity in the U.S. While including a free standing bidet to your home needs specialized plumbing lines, bidet water closet seats and handheld bidet sprayers are easy to set up and need extremely little area in your shower room.

With a bidet, you do not need bathroom tissue after using the water closet considering that the bidet does the cleaning for you. For some people, this practical and eco-friendly enhancement to the shower room is a favorable experience.

Bidets come in numerous designs and 2 arrangements, oblong and extended. Most of the bidet seats on the marketplace today make use of power to use luxury, luxury features. There are some standard needs and referrals to adhere to when mounting an electrical bidet water closet seat, as it associates with the electrical outlet (see our electrical referrals web page). If your electrical outlet does not satisfy these referrals, you will need to obtain an electrical contractor bent on make the needed modifications.

They may need plumbing adjustments to your shower room, which brings about differing costs. This has an ordinary range of $500 to $1,500 for including a ceramic floor-mounted bidet to a bathroom, with most individuals paying around $1,000 overall.

This task’s low cost is around $400 for a basic bidet mounted in a bathroom with existing plumbing. The high price is around $2,500 for a wall-mounted bidet in a bathroom that needs comprehensive plumbing and surface work.

Plumbing Demands of a Bidet

Since bidets have blending valves comparable to taps that permit you to adjust the rinse water to a comfy temperature level, one more need is both a hot and cold-water supply. Furthermore, the plumbing code requires what’s called a “vacuum breaker” to be utilized with bidet products.

Vacuum breakers prevent water from being siphoned back into the supply system and causing contamination. A lot of bidets have an integral vacuum breaker, but it’s smart to validate this prior to you acquire your bidet. If one is doing not have, as opposed to common shut down at the wall surface, you can acquire ones that have a vacuum cleaner breaker.

Another distinction in between mounting a bidet and mounting a water closet is the dimension and setup of the waste line. Water closets have internal traps to stop sewage system gases from running away into occupied areas. Bidets don’t, and a trap needs to be mounted in the rough plumbing below| the flooring. Likewise, because bidets are used for washing only and not for solid waste, their drains are typically only 1 1/2 inch in size, contrasted to the 3-inch drain pipelines most w.c.s make use of. In fact, the drain setting up for a bidet is a lot more like that for a shower or bath tub than a water closet.

Setting up Wall- and Floor-Mounted Bidets

Wall-mounted bidets need a special frame to be mounted in the wall surface prior to drywall and ceramic tile. Mounting screws affixed to this frame protrude from the wall surface, and all the plumbing connections are made at the wall surface. A special drain link is utilized that seals when the drain from the bidet is pushed in. The drain of a floor-mounted bidet is constantly in the flooring, but the products could come out of the flooring or the wall surface. In every instance, it is very important to examine the plumbing design in the bidet’s setup instructions and ensure the harsh plumbing is specifically where it’s supposed to be.

With the flooring and wall finishes completed and the stop valves mounted on the rough plumbing products, you can begin to actually set up the bidet now. The area of a wall-mounted unit is figured out by the formerly mounted screws.

Floor-mounted systems are attached using wall mount screws, which have a lag string on one end and a device string on the other. Locate and predrill the holes for these screws using a design template (if one is supplied) or by positioning the bidet so its drain opening lines up with the trap and waste pipe in the flooring.

Since setup procedures differ for different bidets, make certain to review the supplier’s instructions prior to you begin. Most of the times, it’s much easier to lay out and set up supply lines prior to mounting the bidet to wall surface or flooring.

Wall-mounted bides are harder to set up after that floor-mounted designs. Some wall-mounted systems have special hardware that threads onto the screws prior to the bidet is mounted, while others simply make use of nuts and washers. In either instance, you’ll be supporting the bidet from over while safeguarding the mounting screws by feel from below. As you’re positioning the bidet on the screws, the drain needs to be straightened with that in the rough plumbing, and whatever is pushed home at once. An assistant can make a distinction below.

Floor-mounted bidets are placed over the screws you have actually threaded into the flooring and held back with nuts and washers, just like a water closet. The drain setting up is placed into the hole in the bidet from above, and the drain connections are tightened up using an access opening in the rear of the bidet.

The last actions are affixing the flexible products to the shutoffs. Check for leaks, take care of any kind of you may find, and after that caulk the bidet to the wall surface or flooring with a neat grain of silicone sealant.

The Bidet Seat Option

If you don’t have space for a specialized unit, a bidet-seat for your water closet is an option. There are 2 typical snags. First, bidets make use of more water than w.c.s do, so common 3/8-inch water closet shutoffs have to be replaced with 1/2-inch ones. This may need knowing just how to solder pipe. Second, because there won’t be a warm water supply at the water closet, bidet-seats have integral electrical heating units. There needs to be a GFCI-protected electrical outlet close by.

If you have those points, after that the setup refers getting rid of the existing water closet seat and mounting the base for the bidet-seat in its place. Water is connected to the base from the shut-off via an adaptable supply, and the heating system is connected in.

Then, the bidet seat is mounted to its base according to that supplier’s instructions.

Bidet Installation Rates in Blakes

National average price $1,000.
Typical range $500-$1,500.
Lowest price $500.
Maximum price $2,500.

Bidet Installation Price by Project Range

Low $500
A standard bidet in a bathroom currently plumbed, mounted.

Typical Price $1,000
A floor-mounted bidet with the necessary plumbing extension, mounted.

Maximum price $2,500
A wall-mounted bidet with a substantial plumbing extension and surface work, mounted.

What is a Bidet, Japanese Toilet, Washlet, Shower Toilet or Smart Toilet?

At its simplest, a bidet is a bowl-shaped seat with taps to clean after using the water closet. A bidet can obtain you cleaner than bathroom tissue and is a lot more eco-friendly than other techniques. Bidets can be mounted on your flooring or wall surface, and some w.c.s have integrated bidets or water closet seats with bidet features. A standard bidet is made from ceramic and made to be straddled, with the customer facing the rear of the component.

Floor-Mounted Bidets in Hillsborough County, Florida

Floor-mounted bidets are the most typical design. Like floor-mounted w.c.s, they generally get water from the wall surface and drain with the flooring. The flooring holds the weight with a floor-mounted bidet, so beyond the water attach and the drain, the setup is straightforward.

Once the plumbing is done, the bidet is embeded in place and bolted to the flooring. This also makes replacements easy because the old bidet can be lifted off and a new one put down in mins if the plumbing is in good condition. These designs price in between $200 and $600 usually.

Wall-Mounted Bidets in Hillsborough County, Florida

Wall-mounted bidets are terrific for modern shower rooms. They do not interrupt the flooring’s visual, so it can make a small shower room look larger. Also a few customers find it easier to keep clean.

Like wall-mounted w.c.s, a wall-mounted bidet takes a lot more work to set up. This is because the wall surface needs to be opened up and a provider mounted in the wall surface in between the studs. This holds the weight of the bidet and the user.

The wall surface needs to be redecorated after the bidet is mounted. The average rate for a wall-mounted bidet is in between $300 and $700 usually.

Bidet Installation Price in 33602 Blakes, Florida

Assuming that your design can quickly fit a bidet, the setup process mainly involves the component’s plumbing. You need a water line installed where the bidet is, and the bidet’s drain should be connected to the plumbing system. This may mean opening the wall surface, flooring, or both in close proximity to where the bidet will be mounted. When opening the flooring, the bidet generally covers the opening, but the wall surface may need to be patched or painted.

Depending upon just how much the pipelines should be run and just how hard the wall surface and flooring products are to cut through, the whole process takes about 2 to 3 hours usually.

Bidets are mounted by plumbings charging in between $45 and $200 an hour for a lot of jobs. Since they need to run pipelines to the bidet, the job can be straightforward or hard, relying on just how much the pipelines should run. If you have to reroute other components to fit the bidet or the plumbing is old and needs upgrading, this can increase your costs substantially. For a common bidet setup of 2 to 3 hours, the labor costs vary from $250 to $600, with most individuals paying around $500 for setup out of the $1,000 overall.

Bidet W.c. Seat Installation Price in 33602 Blakes, Florida

Bidet water closet seats can be found in numerous designs. Some are meant to be mounted quickly DIY. In this instance, you need to unscrew your water closet’s water supply, screw on the T couplet, and set up the seat. If your bidet water closet seat needs a plumbing or electrical contractor to set up, anticipate costs in the series of $200 to $1,000. This array depends upon your plumbing and power’s design and how much of the wall surfaces the plumbing technician or electrical contractor needs to open up. Since a lot of shower rooms do not have an electrical outlet beside the water closet and most w.c.s are only plumbed for cold water, including these features elevates setup costs. The seat mounts quickly in mins, offered the area awaits the set up.

Water Closets with Integrated Bidets

A fairly new component on the marketplace is a water closet featuring an incorporated bidet. Instead of a different water closet and bidet or a water closet with a seat that works as a bidet, these are w.c.s with added features integrated.

Just like the bidet water closet seats, you can find a water closet with an incorporated bidet with numerous features. Some are standard, offering simply the water spray, while others have integrated MP3 players, warmed seats, deodorizers, and a lot more. They are not as typical as the other alternatives and price significantly a lot more, around $1,000 – $1,200, but they set up like a standard water closet and do not need as much area. They need a close-by electrical outlet to work, nevertheless.

Benefits and drawbacks of a Bidet

Many individuals delight in using a bidet and the benefit it brings. There is no requirement for bathroom tissue with a bidet. So, you have lower monthly costs, do not need to bother with the ecological impact of paper, and may have less water closet obstructions. Bidets are taken into consideration a lot more hygienic by some and supply a customized experience in the lavatory.

However, bidets take up a lot of area. Every bidet needs a minimum of 30 inches, with 36 inches being the suggested amount. It also needs to be mounted near the water closet for best use, and the water closet also needs 30 to 36 inches. For a small shower room, including a bidet may need major renovations. Also in larger shower rooms, it may mean relocating cabinets or other plumbing to far better fit the bidet.

Bidet Upkeep in 33602 Blakes, Florida

Bidets are easy to tidy and preserve. The ceramic is quickly wiped down with a cloth and shower room cleaner. Since the bidet does not handle solid waste, it is easy to keep tidy and less likely to stain.

Bidet water closet seats can also be wiped down with a soft, wet cloth as needed. Occasionally, a bidet seat or spray obstructions from tough water. If this happens, soak the nozzle in vinegar to dissolve the clog and flush with tidy water.