If you wish to obtain a bidet installed in North Fort Myers we can assist. Our skillful setup service providers can deal with all your needs.

Professional Service
Fast Response Time in Lee County, Florida
Bidet Installment
For Every Kinds of Bidets, Japanese Toilets, Washlets, Shower Toilets and Smart Toilets
Several Alternatives to Select From
Residential and also Commercial Service

Please call (786) 635-1688 or submit our easy contact form and also tell us about your bidet setup needs. We will certainly reply you immediately.

What are the benefits of using a Bidet?

Bidets have actually been utilized in Europe for decades and also have actually started to grow in popularity in North Fort Myers. While including a free standing bidet to your house needs specialized pipes lines, bidet water closet seats and also handheld bidet sprayers are easy to install and also need really little space in your bathroom.

With a bidet, you do not require toilet tissue after using the water closet given that the bidet does the cleansing for you. For some people, this hassle-free and also eco-friendly addition to the bathroom is a favorable experience.

Bidets are available in several designs and also two arrangements, oval and also lengthened. A number of the bidet seats on the marketplace today utilize electrical power to provide high-end, high-end attributes. There are some fundamental requirements and also suggestions to adhere to when setting up an electric bidet water closet seat, as it associates with the electrical outlet (see our electrical suggestions web page). If your electrical outlet does not fulfill these suggestions, you will certainly require to obtain an electrical contractor out to make the required changes.

They might need pipes changes to your bathroom, which causes differing expenses. This has an ordinary range of $500 to $1,500 for including a ceramic floor-mounted bidet to a restroom, with many people paying around $1,000 total amount.

This job’s low cost is around $400 for a standard bidet installed in a restroom with existing pipes. The high cost is around $2,500 for a wall-mounted bidet in a restroom that needs considerable pipes and also surface work.

Plumbing Requirements of a Bidet

Due to the fact that bidets have mixing valves comparable to taps that permit you to change the rinse water to a comfy temperature level, another need is both a warm and also cold-water supply. In addition, the pipes code needs what’s called a “vacuum breaker” to be utilized with bidet supplies.

Vacuum breakers stop water from being siphoned back into the supply system and also triggering contamination. The majority of bidets have an integral vacuum breaker, but it’s clever to validate this prior to you purchase your bidet. If one is lacking, as opposed to typical turned off at the wall surface, you can purchase ones that have a vacuum breaker.

One more distinction between setting up a bidet and also setting up a w.c. is the size and also configuration of the waste line. W.c.s have interior traps to avoid sewer gases from leaving into occupied spaces. Bidets don’t, and also a trap needs to be installed in the rough pipes below| the floor. Likewise, since bidets are used for rinsing just and also not for solid waste, their drains are generally just 1 1/2 inch in diameter, compared to the 3-inch drainpipe pipes most toilets utilize. In fact, the drainpipe assembly for a bidet is a lot more like that for a shower or bath tub than a w.c..

Installing Wall- and also Floor-Mounted Bidets

Wall-mounted bidets need an unique structure to be installed in the wall surface before drywall and also tile. Placing bolts affixed to this structure protrude from the wall surface, and all the pipes links are made at the wall surface. A special drainpipe link is utilized that seals when the drainpipe from the bidet is pushed in. The drainpipe of a floor-mounted bidet is constantly in the floor, but the supplies could appear of the floor or the wall surface. In every instance, it is very important to assess the pipes design in the bidet’s setup guidelines and also make sure the rough pipes is exactly where it’s supposed to be.

With the floor and also wall surfaces completed and also the stop valves installed on the rough pipes supplies, you can begin to really install the bidet now. The area of a wall-mounted unit is figured out by the previously installed bolts.

Floor-mounted units are affixed using hanger bolts, which have a lag thread on one end and also a machine thread on the various other. Locate and also predrill the holes for these bolts using a design template (if one is provided) or by placing the bidet so its drainpipe opening aligns with the trap and also drain in the floor.

Considering that setup procedures differ for various bidets, ensure to read the manufacturer’s guidelines prior to you begin. For the most part, it’s much easier to lay out and also install supply lines prior to placing the bidet to wall surface or floor.

Wall-mounted bides are more difficult to install then floor-mounted designs. Some wall-mounted units have unique equipment that strings onto the bolts prior to the bidet is installed, while others just utilize nuts and also washers. In either instance, you’ll be sustaining the bidet from over while protecting the placing bolts by feel from below. As you’re putting the bidet on the bolts, the drainpipe needs to be straightened with that in the rough pipes, and also every little thing is pressed house at the same time. An assistant can make a distinction below.

Floor-mounted bidets are put over the bolts you have actually threaded into the floor and also held back with nuts and also washers, much like a w.c.. The drainpipe assembly is placed into the hole in the bidet from above, and also the drainpipe links are tightened by way of an accessibility opening in the rear of the bidet.

The last steps are connecting the flexible supplies to the shutoffs. Check for leaks, deal with any you might locate, and afterwards caulk the bidet to the wall surface or floor with a cool bead of silicone sealer.

The Bidet Seat Choice

If you don’t have space for a devoted unit, a bidet-seat for your water closet is a choice. There are two usual grabs. First, bidets utilize more water than toilets do, so typical 3/8-inch water closet shutoffs have to be replaced with 1/2-inch ones. This might need understanding how to solder pipeline. Second, since there will not be a hot water supply at the water closet, bidet-seats have important electric heaters. There needs to be a GFCI-protected electrical outlet nearby.

If you have those things, then the setup is a matter of removing the existing water closet seat and also setting up the base for the bidet-seat in its place. Water is linked to the base from the shut-off through a versatile supply, and also the heater is plugged in.

Then, the bidet seat is installed to its base according to that manufacturer’s guidelines.

Bidet Installment Prices in North Fort Myers

National average cost $1,000.
Typical range $500-$1,500.
Lowest cost $500.
Maximum cost $2,500.

Bidet Installment Expense by Job Range

Minimum $500
A standard bidet in a restroom currently plumbed, installed.

Typical Expense $1,000
A floor-mounted bidet with the required pipes extension, installed.

Maximum cost $2,500
A wall-mounted bidet with a comprehensive pipes extension and also surface work, installed.

What is a Bidet, Japanese Toilet, Washlet, Shower Toilet or Smart Toilet?

At its simplest, a bidet is a bowl-shaped seat with taps to clean after using the water closet. A bidet can obtain you cleaner than toilet tissue and also is a lot more environmentally friendly than various other approaches. Bidets can be installed on your floor or wall surface, and also some toilets have built-in bidets or water closet seats with bidet attributes. A conventional bidet is made from ceramic and also made to be straddled, with the individual encountering the rear of the fixture.

Floor-Mounted Bidets in Lee County, Florida

Floor-mounted bidets are the most usual design. Like floor-mounted toilets, they generally get water from the wall surface and also drainpipe via the floor. The floor holds the weight with a floor-mounted bidet, so beyond the water connect and also the drainpipe, the setup is easy.

When the pipework is done, the bidet is embeded in place and also bolted to the floor. This also makes replacements easy since the old bidet can be taken off and also a new one put down in mins if the pipes is in good condition. These designs cost between $200 and also $600 on average.

Wall-Mounted Bidets in Lee County, Florida

Wall-mounted bidets are terrific for modern bathrooms. They do not disrupt the floor’s visual, so it can make a small bathroom appearance bigger. Also a few people find it more comfortable to keep clean.

Like wall-mounted toilets, a wall-mounted bidet takes a lot more effort to install. This is since the wall surface needs to be opened up and also a service provider installed in the wall surface between the studs. This holds the weight of the bidet and also the human.

The wall surface needs to be redecorated after the bidet is installed. The average rate for a wall-mounted bidet is between $300 and also $700 on average.

Bidet Installment Expense in 33915 North Fort Myers, Florida

Assuming that your design can conveniently suit a bidet, the setup process mostly includes the fixture’s pipes. You require a water line installed where the bidet is, and also the bidet’s drainpipe must be linked to the pipes system. This might mean opening the wall surface, floor, or both in close proximity to where the bidet will certainly be installed. When opening up the floor, the bidet generally covers the opening, but the wall surface might require to be covered or painted.

Depending on how much the pipes must be run and also how challenging the wall surface and also floor materials are to cut through, the whole process takes about 2 to 3 hours on average.

Bidets are installed by plumbing technicians billing between $45 and also $200 an hour for the majority of jobs. Due to the fact that they require to run pipes to the bidet, the task can be easy or challenging, depending upon how much the pipes must run. If you have to reroute various other components to suit the bidet or the pipes is old and also needs updating, this can raise your expenses significantly. For an ordinary bidet setup of 2 to 3 hours, the labor expenses vary from $250 to $600, with many people paying around $500 for setup out of the $1,000 total amount.

Bidet W.c. Seat Installment Expense in 33915 North Fort Myers, Florida

Bidet water closet seats been available in several designs. Some are implied to be installed conveniently DIY. In this instance, you require to loosen your water closet’s water supply, screw on the T couplet, and also install the seat. If your bidet water closet seat needs a plumbing or electrician to install, expect expenses in the series of $200 to $1,000. This array relies on your pipes and also electrical power’s design and also how much of the wall surfaces the plumber or electrician needs to open up. Due to the fact that the majority of bathrooms do not have an outlet next to the water closet and also most toilets are just plumbed for cold water, including these attributes increases setup expenses. The seat sets up conveniently in mins, provided the location is ready for the install.

W.C.s with Integrated Bidets

A rather brand-new fixture on the marketplace is a w.c. including an incorporated bidet. As opposed to a different water closet and also bidet or a w.c. with a seat that works as a bidet, these are toilets with extra attributes built-in.

Like the bidet water closet seats, you can locate a w.c. with an incorporated bidet with several attributes. Some are fundamental, providing simply the water spray, while others have actually incorporated MP3 players, heated seats, deodorizers, and also a lot more. They are not as usual as the various other options and also cost substantially a lot more, around $1,000 – $1,200, but they install like a standard water closet and also do not require as much space. They need a neighboring electrical outlet to function, nonetheless.

Benefits and drawbacks of a Bidet

Many people enjoy using a bidet and also the convenience it brings. There is no need for toilet tissue with a bidet. So, you have reduced month-to-month expenses, do not require to worry about the ecological influence of paper, and also might have less water closet obstructions. Bidets are considered a lot more hygienic by some and also give a custom-made experience in the restroom.

However, bidets take up a lot of space. Every bidet needs a minimum of 30 inches, with 36 inches being the suggested quantity. It also needs to be installed near the water closet for finest usage, and also the water closet also needs 30 to 36 inches. For a small bathroom, including a bidet might need major remodellings. Also in bigger bathrooms, it might mean moving cabinets or various other pipes to far better suit the bidet.

Bidet Upkeep in 33915 North Fort Myers, Florida

Bidets are easy to clean and also preserve. The ceramic is conveniently wiped down with a cloth and also bathroom cleaner. Due to the fact that the bidet does not handle solid waste, it is easy to keep clean and also much less most likely to stain.

Bidet water closet seats can also be wiped down with a soft, damp fabric as required. In some cases, a bidet seat or spray obstructions from tough water. If this takes place, soak the nozzle in vinegar to dissolve the obstruction and also flush with clean water.